Have you
met the world's
leading disinfectant?
When it comes to the threat of deadly pathogens and diseases, prevention is always better than cure. Intra Multi-Des GA is a widely registered disinfectant for the biosafety of you and your crops.
Proven efficacious against a wide range of worst-case-scenario microorganisms. Intra Multi-Des GA contains unique wettability properties, giving the dilution 7 times more surface coverage. Additionally, Intra Multi-Des GA has deep penetration properties, making the product able to reach all pathogens hiding in the cracks and holes.
The combination of deep penetration properties and wettability properties gives the product an extreme long lasting effect against algae.
These unique properties combined makes Intra Multi-Des GA the leading disinfectant you can rely on.
We at Intrahorti believe that prevention is key. With Multi-Des GA you are assured of a pathogen free environment for your crops. Optimal biosecurity in your greenhouse will significantly decrease the amount of pesticides used to counter attack pathogenic infections.
Daisy Roijackers | Manager biosecurity
Intra Multi-Des GA is available in the following packaging units: 1 L bottle, 5 L can, 10 L can, 20 L can, 200 L barrel and 1000 L IBC.
Please note that Intra Multi-Des GA is classified as UN 2920 8(3).
Intra Multi-Des GA is registered in Europe for the following types of use:
Certifications
Intra Multi-Des GA is registered in many countries, both inside and outside of Europe, including the Dutch Board for the Authorisation of Plant Protection Products and Biocides (CTGB) and many more. Additionally we have many independent studies on the efficacy of Intra Multi-Des GA, focussing on the most relevant pathogens.
1. Dry cleaning
Sweep the area clean: remove all unattached coarse dirt and plant residues
2. Wet cleaning
High pressure washing or integrated misting systems to pre-soak all clinging dirt.
3. Detergent soaking
Use a 2 % (1-3%) Intra Foam Cleaner concentration, preferably at min. 150 bar, with a foam lance as a thin coating on the surfaces and let is settle. Minimum contact time is 20 minutes, maximum contact time is 1 hour.
4. Wash off
High pressure washing to remove the dissolved dirt. Pay special attention to the pits and other exit points of the water to prevent puddle forming.
5. Drying
Allow the surfaces to dry.
6. Disinfecion
Start disinfection with Intra Multi-Des GA
SPRAYING
Concentration Target pathogen
0.2% Bacteria, yeasts
(2 L per 1000 L water)
0.75% Viruses
(7.5 L per 1000 L water)