Dosing Instructions
The general recommended dosage of Intra Hydropure in irrigation water is 40-100 ppm. This corresponds to 40-
100 milliliters of Intra Hydropure per 1,000 litres of water. This can be dosed with a dosing pump that can handle
these small quantities. Or this can be dosed in the A or B fertilizer tank (the tank without the trace elements). When
dosing with a dosage pump, make sure that the Hydropure packaging remains closed as much as possible.
Clean and disinfect the drip system with 2-4% Intra Hydropure for 6-12 hours.
When reacting with organic material, Intra Hydropure dissolves in water and oxygen.
Note, make sure that oxygen has room to escape.
Clean the plugs and hoses by soaking them in 2-4% Intra Hydropure.
Spray gutters and greenhouse structures with 2-4% Intra Hydropure. Use a minimum of 2000 to 3000 liter of water per
hectare and make sure all surfaces are soaked. Do not rinse afterwards, but let them dry.
Intra Hydropure is also excellently applicable by means of a space treatment during the crop rotation. This room treatment is carried out after cleaning. Because Intra Hydropure is based on an ultra-stabilized hydrogen peroxide, this treatment can be carried out the day before planting. The advice is to keep the greenhouse closed for at least 4 hours after the room treatment. An hour of airing is enough to re-enter the greenhouse.
Dosage is 20 - 30 liters Intra Hydropure per hectare supplemented with water up to 100 liters per hectare.
Do not use Intra Hydropure at the same time as crop protection agents or other biocides.
+31(0)413354105
